Pea Gravel Calculator

Cubic yards, tons or bags of pea gravel for patios, paths, play areas and planted borders.

Area shape
Drawing updates as you type. Not to exact scale.
Cost & options

Enter the area's dimensions to see how much material you need.

This pea gravel calculator converts an area and depth into the cubic yards, tons or bags of pea gravel you need — for a loose-stone patio, a garden path, a playground surface, or dressing planted beds.

Pea gravel is small (about 3/8 inch), rounded and does not compact, so depth and edging matter more than with angular stone. Bagged pea gravel is usually 0.5 cubic feet per bag.

Worked example. A 12 ft × 12 ft pea-gravel patio, 2 inches deep on a compacted base. Area = 144 ft². Volume = 144 × 0.167 = 24 ft³ ÷ 27 = 0.89 cubic yards1.2 tons. Add 10% → order about 1 cubic yard or 1.3 tons, plus edging on every side.

How deep should pea gravel be?

Two inches over landscape fabric for a path or patio you walk on, three inches for a play area, and one to two inches when using it as a decorative mulch. Because the stones are round and never lock together, a deeper layer just feels loose and pushes underfoot — 2 inches on a firm base walks better than 4 inches of loose stone.

One cubic yard covers about 160 square feet at 2 inches deep.

Edging is not optional

Rounded pea gravel migrates. Without a hard edge — steel, aluminium, pavers or a trench — it travels into the lawn and onto paths. Set edging proud of the surrounding grade and keep the gravel about half an inch below the top of the edge.

A compacted base of decomposed granite or stone dust under the pea gravel gives a firmer, more stable walking surface than gravel straight onto fabric.

How it is sold

Landscape yards sell pea gravel by the ton or cubic yard; a cubic yard weighs about 1.35 tons. Bags suit small top-ups but get expensive past 15 or so. Order about 10% extra for spreading loss and settling into the base.

Common pea-gravel mistakes

No edging. Rounded stones migrate — steel, aluminium or paver edging on every border is not optional.

Too deep. More than 2 inches over a firm base feels loose and pushes underfoot; depth does not add stability.

Straight onto soil. A 2-inch compacted layer of decomposed granite or stone dust underneath makes a far firmer walking surface.

Using it on a slope. Pea gravel slides; on any real grade choose an angular stone that locks.

Typical densities for gravel and crushed stone
Materiallb / ft³tons / yd³Sold byTypical use
Pea gravel (3/8″, rounded)100–1051.35ton or yd³Paths, patios, dog runs, drainage
#57 crushed stone (3/4″, washed)100–1051.35tonDrainage, slab sub-base, French drains
3/4″ minus / dense-grade105–1151.45tonDriveway base, paver base, road pack
Crushed concrete (RCA)100–1101.35tonDriveway base, structural fill (cheaper)
River rock (1–3″)95–1051.40ton or yd³Dry creek beds, borders, xeriscape
Decomposed granite110–1201.50tonPaths, patios, natural-look driveways
Road base / Class 5110–1201.50tonCompacted base under pavers, slabs, drives

Every material calculator

Each of these uses the same measured-drawing tool with the right density and bag sizes built in: gravel calculator , mulch calculator , concrete calculator , concrete slab calculator , sand calculator , topsoil calculator , paver sand calculator , crushed stone calculator , sonotube concrete calculator , river rock calculator , decomposed granite calculator , road base calculator . Or start from the material calculator homepage and pick a material there.

Frequently asked questions

How much pea gravel do I need?

Multiply area by depth (2 inches for a path) and divide by 27 for cubic yards. A 10 ft × 12 ft patio at 2 inches needs about 0.74 cubic yards, roughly one ton.

How many bags of pea gravel are in a cubic yard?

About 54 bags of 0.5 cubic foot each.

How deep should pea gravel be for a patio?

About 2 inches over a firm, compacted base. Deeper than that feels loose and shifts underfoot.

How much does a cubic yard of pea gravel weigh?

About 1.35 tons (2,700 lb).

Does pea gravel need edging?

Yes. The rounded stones migrate without a hard edge — steel, aluminium, pavers or a cut trench along every border.

How much area does a ton of pea gravel cover?

About 120 square feet at 2 inches deep, or 80 square feet at 3 inches.

Can you walk on pea gravel?

Yes, and it makes a comfortable loose-surface patio, but it is harder for high heels, wheelchairs and strollers than a compacted or paved surface.

What goes under pea gravel?

Landscape fabric at minimum; a 2-inch compacted layer of decomposed granite or stone dust for a firmer walking surface.

How much pea gravel for a fire pit area?

A 10-foot-diameter circle at 2 inches deep is about 0.5 cubic yards, or 0.7 tons. Keep gravel — not mulch — within a few feet of the fire.

Is pea gravel good for a patio?

It makes a comfortable, well-draining loose patio, but it is harder for chair legs, strollers and heels than a paved surface. A firm compacted base helps a lot.

How deep should pea gravel be over fabric?

About 2 inches for a path or patio, 3 inches for a play area. A compacted sub-base is better than fabric alone.

Does pea gravel wash away in rain?

On flat ground with edging it stays put. On any slope or in a drainage path it moves — use angular stone there.

How many bags of pea gravel equal a yard?

About 54 bags of 0.5 cubic feet. Bags only make sense for small top-ups; bulk is far cheaper past ~15 bags.